Products / Wall-mounted ballet barres
Wall-mounted ballet barre Arabesque
The Arabesque’s wall brackets are designed to give you the maximum resistance to pressure and to bring barres together to create your ideal space. With steel brackets and saddles in a silver finish that hold a single wooden beam of 40 mm in diameter, the Arabesque is a favourite in dance schools around the globe as well as in private homes.
There’s strength in unity
The wall brackets and saddles are also designed to allow for two wooden beams to join together in each saddle. This means you can have the effect of one continuous barre running along the length of your studio wall, without any spaces between the beams, and with total stability at every point. We recommend a maximum distance between brackets of 2 metres.
The wooden bars slide into the saddles and are held together in the middle with small hidden screws that don’t damage the wood, so its properties are kept intact.
It stands up to pressure. From any direction
The dimensions of the steel wall bracket have been calculated to guarantee complete stability. The cylindrical form of the saddles that grip the wooden bar helps to distribute pressure dancers put on the beam. You don’t have to worry about groups of students in classes warming up with stretches or practising their moves at the same time, as the Arabesque’s wall support is resistant to pressure from any direction and will not budge a millimetre.
Super-resistant materials
Steel is an iron alloy that naturally contains a small percentage of carbon, making it tough and resistant to impact, changes in temperature, and corrosion, and therefore an ideal material to support an intense ballet practice.
The strength and resistance of steel combined with the flexibility, grip and warm feel of wood let you get the utmost enjoyment out of your exercises. We provide you with four screws and four Fischer dowels to firmly fix each bracket to the wall along with the wooden beams. You’re sure to enjoy your wall-mounted Arabesque ballet barre for many years.
More info
SKU code: 30590421
Materials: Steel wall brackets in silver or black colour.
Weight: 1 x 1,15 kg
Wooden beam: 1 unit | Ø: 40mm | L: 100cm, 150cm, 200cm or 300cm | Yellow pine
We recommend a maximum distance between brackets of 2 metres
Screws and tools:
- DIN 7505A M-5,5 x 50mm x2
- Fischer sx-8 x2
- DIN 7505A M-4,5 × 20mm x2
1. Place the brackets on the wall in the position you wish to install them, maintaining a maximum distance of 2 metres between each one. Mark the 4 points on the wall where the brackets will be attached. Drill 4 holes at the marked points using an 8 mm drill bit.
2. Insert a Fischer dowel into each hole and secure the brackets to the wall with the 4 large DIN 7505A 5.5 x 50 mm screws. If the available space is limited, we recommend inserting the wooden bar into the brackets before attaching them to the wall.
3. With the wooden bar centered, secure it with the small DIN 7505A 4.5 x 20 mm screws through the holes at the bottom of the bracket. If you are using more than two brackets to connect two wooden bars, insert one at each end of the bracket to meet in the centre position. Then use the screws to secure them.
